Osmo Teak Oil (007)

  4.8/5.0   13 reviews

You'll need enter area above for 2 coats (Recommended)

Wood type and application can vary coverage

No. of coats 2
Coverage Up to 24 per litre
Drying time 12 hrs
Size 5ml Sample, 750ml, 2.5L
MPN 007S, 007C, 007D
GTIN 5060403890010, 5060403890011, 5060403890012

Osmo Teak Oil is suitable for use on Teak, Garapa, Meranti, Koto, Bangkirai, Massaranduba and Iroko as well as other exotic hardwoods. It can also be used on pressure impregnated wood like Pine.

Please Note: Teak Oil 007 is a dual purpose product and is labelled as 'Teak Oil 007' but supplied as Decking Oil 007, but it works the same on both decking and other external wood surfaces. This is confirmed by the text on the back of the tin. Please be advised that 125ml sample tins are printed in German only.

Before opening the 5ml sample sachets, squeeze the packet several times to ensure that the oil, wax and resins inside are thoroughly mixed.

Hardwoods that contain high concentrations of natural oils should be left to weather for approximately 4 weeks. This allows for some of the natural oils in the surface grain to dissipate. Alternatively, these natural oils can be removed by cleaning the surface of the wood with methylated spirit or Osmo Brush Cleaner and Thinner (8000) (degreaser).

  1. Wood surface must be clean, dry and frost-free (moisture content max. 20%)
  2. Clean old microporous stains thoroughly
  3. Old paints, lacquers and varnish based stains must be completely removed
  4. Remove any mould or algal growth with Osmo Gard Clean
  5. For wood that has turned silver / grey due to weathering and sun damage, we recommend first restoring the colour with Osmo Wood Reviver Gel (6609)
  6. Fill any holes or gaps in the wood with Osmo Exterior Gap Sealer
  7. Pre-treat the wood with Osmo WR Base Coat for added protection if required

Always do a test area before starting any project to check suitability and compatibility. Follow the manufacturer's instructions on the tin at all times.

  1. Apply the Teak Oil thinly with an Osmo Soft Tip Brush or lint-free cloth, working the oil into the surface in the direction of the wood grain
  2. Remove any excess oil from the surface of the wood with a clean cloth
  3. Allow to dry for approximately 12 hours with good ventilation before applying a 2nd thin coat

Regular Cleaning

Brush over wooden surface with a medium bristle brush to remove surface dirt and debris. A damp lint-free cloth can also be used to wipe off liquid and food spillages.

Deep Cleaning

For stubborn marks and stains, we recommend cleaning with Osmo Exterior Spray Cleaner (8027).


For areas that have become badly discoloured, scuffed or scratched, use a light abrasive to rub back the affected area before re-applying a small amount of Osmo Teak Oil to the damaged areas for a seamless repair.

Q. Do you have a product that I can use on my decking that will be safe for my fish pond nearby?

A. Osmo Teak Oil can be used on any wood, not just teak and is safe for your fish once it has dried on the wood but I don't know of any products that are safe in their wet form.

Q. Can this product be used on Roble wood?

A. Roble is a dense, oily wood that is becoming increasingly popular, amongst superstores, for making garden furniture from. We receive many enquiries from customers, not knowing where they can obtain a suitable maintenance product. The Osmo Teak Oil 007 is ideal because it is a thin oil which is perfect for sinking into the tight grain structure of not only Roble, but also; Teak, Jarrah, Ipe, Iroko, Idigbo and many other oily or exotic hardwoods. It also contains wax which the manufacturers of Roble furniture recommend.

13 customer reviews
A lovely finish, and easy to apply Economical as well by Ian Pike

It brings out the very best in the grain of the wood and knowing that it provides protection is peace of mind.

Reviewed 750ml on: 29/11/17
Easy to apply,Great finish when fully dried! by Craig Sheppard

I was advised by a very helpful and friendly member of staff to use this product for protecting an outdoor teak table. I found that it was easy to apply,Great finish when fully dried! Thanks!!!

Reviewed 750ml on: 19/10/17
Osmo are simply the best by Steve Batchelor

The products arent cheap but you know that they will do the job. You just need to make sure you buy the product for the job - inside and outside are different but you get the right protection from the right product.

Reviewed 2.5L on: 08/09/17
Terrific finish by Jo Wilson

I used as a top coat on a teak bench and it went on with ease looks good but must use sparingly. Great finish on its own.

Reviewed 750ml on: 25/05/17
Excellent product by David Rollin

I bought this oil for an outdoor bench. It is easy to apply and produces a superb finish. Not cheap but worth the money.

Reviewed 750ml on: 21/05/17
Asimple product to use by P Harvey

By the time I finished up the first tin quickly obtained another of the excellent product.

Reviewed 750ml on: 15/04/17
Premium Teak Oil by Katherine McGuire

I was advised by a specialist mid-century furniture dealer that this is the best oil. Have used this once and it appears to be very good.

Reviewed 750ml on: 08/12/16
Easy to apply and very economical by Gareth Watson

Does what its supposed to do...protect and enhance wood.

Reviewed 750ml on: 23/10/16
Easy to apply and the decking looks good by John Linwood

Osmo Teak Oil is very easy to apply, dries well and brings out the natural wood colour. I used the clear oil and am pleased with the result.

Reviewed 2.5L on: 17/10/16
Excellent product by Joan Dutton

Given good colour and finish to faded decking

Reviewed 2.5L on: 22/09/16
Absolutely fantastic by Stephen Underwood

There is a saying of "Buy cheap buy twice" and this applies here. Having been stung by various cheaper products, we, some time ago opted for better quality and we have not look back. We use this all of the time and in the long run it works out cheaper PLUS your furniture/decking/fences have a look of quality about them.

Reviewed 2.5L on: 11/09/16
Not convinced by Barry Kemp

Was recommended this product for coating new outdoor teak furniture. It's turned the wood an unpleasant orange and I'm hoping this will fade in time. Since read that teak is best left untreated and that, if you apply teak oil it will need re-doing every year. Maybe a mistake...

Reviewed 2.5L on: 09/09/16
A note from us...

Hello Mr Kemp,

Many thanks for taking the time to write a review of the Teak Oil for us. A clear oil will often highlight the natural tones of the wood it is applied to, for example pine can often go quite orange or yellow when clear oil or varnish is applied and this is the treatments highlighting the natural pigments in the wood. It is the reason that we always recommend a test area.

Oil does need a regular top up to maintain its protection level and the benefit of this is that you do not have to remove the existing oil to do this, just clean and dry the surface and then re apply. Unlike varnish where you often have to remove the varnish and take back to bare wood in order to re treat the wood. To discuss further or for more information please feel free to call 0800 7818 123.

Kind regards Sam.

Easy to apply, coats the wood evenly, looks good - but will it last? by David Smith

Products to coat hardwoods, particularly jarra, are hard to find. Osma teak oilfits the bill but you have to search hard on the website to see which woods it is suited to. Its easy to apply, dries quickly and gives a good sation finish. Time will tell if the coating lasts for mor than a couple of years - I would like to think so.

Reviewed 750ml on: 02/09/16