|No. of coats||2|
|Coverage||Up to 24m² per litre|
|Drying time||9 hrs|
|Size||5ml sample, 125ml, 500ml|
|MPN||Please Select Size/Option|
|GTIN||Please Select Size/Option|
Achieve a range of effects with the following Osmo worktop oil products:-
Before opening the 5ml sample sachets, squeeze the packet several times to ensure that the oil and pigments inside are thoroughly mixed.
Ensure that real wood kitchen work surfaces and worktops are clear of dirt, debris and other contaminates before applying Osmo Top Oil.
Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the tin at all times. Osmo Top Oil is ready to use and does not require thinning. Stir well before use.
The grain of the wood is enhanced once this product has been applied and if the final finish is not shiny enough, buffing it with a cloth will create a sheen. Because the natural oils and waxes penetrate deep into the surface they help to keep the wood supple thus preventing it from getting dry and brittle, therefore reducing swelling and shrinkage.
If a deeper satin finish is required, the oiled surface can be polished with Osmo Liquid Wax Cleaner once the surface has fully dried.
Oiled surfaces should never be cleaned with steam cleaners, harsh household detergents or cleaners. These cleaning products will likely degrade the finish and its performance.
Kitchen work surfaces and table tops that have been treated with Osmo Top Oil can be cleaned with Osmo Wash And Care and a damp, lint-free cloth, then wiped dry. Alternatively, use Osmo Spray Cleaner (8026)
Stubborn marks and stains can be removed by using Osmo Liquid Wax Cleaner, that both cleans and regenerates oiled surfaces.
Renovating, even partially, is easy. Just clean and re-treat worn areas with a thin coat of Osmo Top Oil - no sanding, no repair marks and no removal of previous Top Oil finish is required. No repair marks will be visible if applied thinly and appropriately.
A. Osmo top oil clear matt is ideal for oak kitchen worktops. It is easily applied, very durable, resistant to scratches, scuffs, stains and liquid spillages. Osmo worktop oil is also very easy to maintain and patch repair. If you would like to better retain the natural, untreated look of your oak worktop surfaces, consider Osmo Top Oil Natural. 5ml sample sachets are available for testing.
A. Osmo Worktop Oil is made from a blend of natural oils and waxes and is rated as 'food safe'. Once dry, Osmo worktop oil is safe for humans, animals and plants and is ideal for most kitchen worktop surfaces and other wooden food preparation surfaces. The final finish is microporous and will not crack, peel, flake or blister
A. Osmo TopOil dries in 8 to 10 hours under normal drying conditions. Lower temperatures and/or higher air humidity can increase the drying time. Allow for good ventilation while drying.
A. Apply Osmo Top Oil to kitchen worktops and other work top surfaces thinly and evenly with a lint-free cloth or good quality natural bristle brush, and wipe off any excess oil from the work top. Repeat as above 2-3 times allowing adequate drying time between coats. This applies to all variations of this product.
A. Traditionally, pure linseed oil or tung oil were used for treating hardwood worktops as they penetrate timber more effectively than other natural oils. These oils however can take a long time to dry and often require numerous coats. Maintenance is also required on a more frequent basis than with worktop oils such as Osmo worktop oil which requires just 2 thin coats and will last considerably longer before requiring a maintenance coat.