Manns Classic Beeswax Polish

Manns Classic Beeswax Polish can be quickly and easily applied to most interior wooden surfaces. It is perfect for obtaining a natural wax finish and can be buffed to achieve a high sheen on bare or previously finished wooden surfaces.

Manns Beeswax Polish can also be used as a leather conditioner, restorer, softener and protector. The wax melts into the leather as it's applied and dries to form a protective, water-resistant layer. This layer of protection insulates the leather and prevents oil, grease and dirt from clogging the surface pores.

Please note: The formulation, packaging and 'in tin' appearance of this product changed from June 2018. The beeswax polish however is of the same high-quality and produces an equally high-quality finish.

• For wooden floors, see our range of Wood Floor Polishes

Bare or New Wood

1. Ensure that wood surfaces are clean, dry and free from dust and dirt prior to applying Manns Beeswax Polish
2. If required, fill any gaps or splits in the wood with Manns Trade Mix and Fill or other suitable wood filler
3. Sand smooth taking care to remove all traces of sanding dust with a vacuum cleaner
4. If required, wipe down with a white (uncoloured) lint-free cloth dampened with methylated spirit to clean and degrease prior to applying the wax polish

Previously Waxed Wood

1. Clean previously waxed surfaces with a white (uncoloured) lint-free cloth dampened with white spirit
2. Rub gently to remove surface dust and dirt
3. To retain the patina of old wax and polish finishes, apply Manns Classic Beeswax Polish directly over the old finish
4. Alternatively, old wax and polish finishes can be removed if required using Woodleys Wax and Polish Remover

Staining

Wood surfaces can be stained prior to applying Manns Beeswax Polish if a particular colour is desired.

• For softwoods such as Pine, we recommend using Manns Classic Pine Stain
• For hardwoods such as Oak, we recommend using Manns Classic Oak Stain
• For furniture and other interior wood exposed to direct sunlight, we recommend Manns Trade Light Fast Wood Stain

Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the container at all times.

1. Manns Classic Beeswax Polish can be quickly and easily applied with a soft, lint-free cloth
2. Apply the wax polish sparingly, working on one small area at a time
3. For bare wood 2 - 3 coats are recommended, or 1 - 2 coats for pre-finished wooden surfaces
4. Additional coats can be applied if required
5. A thin coat will dry within 10 minutes, a thick coat will dry in around 20 minutes

To achieve a deep lustre, buff the freshly applied Wax with a soft, lint-free cloth or buffing brush.

To make buffing quicker and easier, some wax buffing brushes, such as Woodleys Cylindrical Buffing Brush and Woodleys Small Round Buffing Brush, can be attached to an electric drill. These save on elbow grease and make the process of polishing easier.

If using an electric drill to buff the beeswax polish to a sheen, it's important to let the bristles of the brush do the work. Pushing down on the spinning brush whilst buffing will strip the wax polish from the surface of the wood.

Maintenance

Surfaces are normally re-coated every 12-18 months, although many people re-wax on a more regular basis. Additional coats of beeswax polish will offer an improved patina.

Repair

Areas that become scuffed or marked can be easily repaired by gently rubbing the damaged area with a Woodleys Finishing Pad or similar abrasive material, then re-applying Manns Classic Beeswax Polish to the damaged area for an invisible repair.

This product is a soft coating that stays on the surface of the wood. For this reason, it isn't really durable enough to be used on a high traffic area such as a tabletop. Call our Woodcare Experts for advice on the best finish suitable for your project on 01303 213838