Envirograf ES VFR Clear Primer

  4.6/5.0   2 reviews

You'll need enter area above for 1 coat (Standard Protection)

Wood type and application can vary coverage

  • A clear water based primer for surfaces to be treated with the Envirograf Fire Protection System
  • Suitable for use on bare wood or over existing painted, varnished or waxed wood surfaces
  • Perfect for protecting garden sheds, summer houses, log cabins, interior panelling and escape corridors
Brand Envirograf
No. of coats 1
Coverage Up to 10 per litre
Drying time hrs
Size 1L, 2.5L, 5L
MPN 0920001000, 0920002500, 0920005000
GTIN 5060403891115, 5060403899989, 5060403899996

Envirograf ES VFR Clear Primer must be used with Envirograf ES VFR Clear Fire Protection Coating and Envirograf ES VFR Translucent Spirit-Based Top Coat to provide the full Class 0 & Class 1 Rating for spread of flame.

Please Note: This product is not suitable for use on Cedar wood such as Cedar cladding. This product is also not suitable for access points such as doors and loft hatches.

Ensure that all surfaces are clean, dry and free from surface dirt, debris and other contaminants.

  • This product can be applied over existing paint systems or wood stains to improve adhesion of the fire protection coating to the substrate
  • If applying over an existing paint or varnish, abrade first with a fine sandpaper to provide a key and ensure good adhesion of the product with the coating below
  • All traces of loose, flaking or peeling material must be removed by sanding to ensure a sound base for the primer

Always do a test area before starting any project and follow the manufacturer's instructions on the tin at all times.

Envirograf ES VFR Clear Primer should not be applied if the air or surface temperature is less than 5℃.

Stir product thoroughly before and during application to ensure a consistent coating and finish

  1. Apply one coat of Clear Primer with a brush or roller
  2. Coverage is approximately 10m2 per litre, depending on the substrate being coated
  3. Allow 2 hours to dry before applying Fire Protection Coating

Once dry, two coats of Envirograf ES VFR Clear Fire Protection Coating may be applied, before finishing with a top coat of Envirograf ES VFR Translucent Spirit-Based Top Coat.

2 customer reviews
Great by Deborah Phillips

Does what it says on the tin

Reviewed 1L on: 26/03/18
Great product by Iain Leggett

went further than expected which is good as it costs a packet.

Reviewed 1L on: 19/06/17