Dulux Heritage Velvet Matt Paint

Dulux Heritage Velvet Matt is a high opacity washable matt emulsion that is suitable for interior walls and ceilings. Being specially formulated with premium quality pigments to generate a quality depth of tone and colour, it can produce a high quality finish that is resilient, enduring and long lasting.

Please Note: Dulux Heritage Testers are for use as a colour tester on interior walls and ceilings only. They are not recommended as a touch-up paint.

To achieve the best quality results, establish that the surfaces are structurally sound, free of imperfections such as dust dirt or any other surface contaminants.

• If the surface is new, then ensure the surface is thoroughly dry before starting the steps of preparation
• Remove all previously applied paint that is peeling, cracked or loose with either a paint stripper Paint stripper or scraper or by sanding the area smooth
• Extra caution needs to be taken if removing paint that is pre 1960s as it could potentially contain harmful levels of lead
• Any defects of the substrate, such as cracks or holes, need to be repaired with a suitable Interior and Exterior Filler and then sanded down to a smooth finish
• If required, sand the project area to produce a smooth and flat finish
• If the project area is showing patches of oil and grease, then wash the area with a suitable detergent, rinse clean and then allow to dry
• If the area is a newly plastered substrate or if the surface is either porous or dusty then apply an appropriate surface sealer

Always perform a test area before starting any project to judge the suitability, effectiveness and finish of the product. Do not apply at temperatures below 7°C as this could seriously hamper the drying process.

• It is recommended to use a good quality short pile microfibre roller and a high quality brush
• Stir and blend the paint to ensure a good mixture of pigment and paint medium, taking care to work the sides and base of the tin
• If being applied to a new surface, then dilute the first coat by 10% to counteract any excessive absorption
• To produce a consistent coverage spread Dulux Heritage Velvet Matt evenly in multiple directions taking care not to apply too thinly and overspread the layer
• The standard recommendation for Dulux Heritage Velvet Matt is to apply two coats to achieve a solid and opaque finish, though further coats may be necessary depending on the quality of the undercoat and the previous colour of the substrate
• It is recommended to leave a 4 hour drying time between coats
• To clean the equipment after use, rinse with clean water and wash hands with warm soapy water

This product is not recommended for spray application

This paint is ideal for living rooms, bedrooms, hallways and other general interior spaces. For kitchens or bathrooms, a moisture resistant or specialist durable finish will offer better long term performance.

It can be lightly cleaned once fully dry, making it suitable for areas that may need occasional wiping. For frequent washing or high wear, consider a tougher interior finish.

On new plaster, thin the first coat with a small amount of clean water to help it absorb evenly. For previously painted or sealed surfaces, the paint can be used straight from the tin.

It is usually touch dry in around 2 hours and can normally be recoated after approximately 4 hours depending on temperature and ventilation.

Yes, it is a water based formulation with low odour during application and is suitable for use throughout the home once proper ventilation is provided.

Yes, it can be applied using brush, roller or spray equipment. When spraying, follow the sprayer manufacturer's guidance on thinning for best results.

Coverage is typically up to 13m² per litre depending on the surface texture and condition. Two coats are recommended for the most even finish.

Dulux Heritage Velvet Matt is available in a curated collection of classic and contemporary shades inspired by traditional colour palettes and modern interior design.

Clean brushes and rollers immediately after painting using warm soapy water. Rinse thoroughly and reshape the bristles before leaving them to dry.