Bona Stone, Tile and Laminate Floor Polish

Bona Stone, Tile and Laminate Floor Polish is a ready to use maintenance coating suitable for a large variety of hard surface floors, including laminate flooring, vinyl, linoleum, terrazzo, unglazed tile (ceramic, quarry), stone and sealed porous marble. Made from a urethane/acrylic blend with added wax for continued protection. Evens out the appearance of flooring for a refreshed new, glossy look.

• Looking for a polish for wooden floors? Use Bona Wood Floor Polish

Dry sweep or vacuum floors to remove any loose dirt and grit to avoid scratching your floor.

1. Clean floors thoroughly with Bona Stone,Tile and Laminate Floor Cleaner and allow to dry
2. Do not use over any floor that has been waxed or oiled, as wax and oil residues will prevent proper adhesion of the polish to the floor

Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the bottle at all times. Do not use on waxed or oiled floors. Shake bottle thoroughly before use and apply at normal room temperature, 18-25°C.

1. Pour a wide, wavy line of polish onto a small section of the floor
2. Spread the product over the section using a Bona Microfiber Applicator Pad on the end of a Bona floor mop
3. Smooth in the direction of the wood grain
4. Continue, section by section, until the whole floor has been treated
5. The floor can receive foot traffic after 2 hours but avoid heavy traffic and replacement of furniture and rugs for the first 12 hours

Cleaning Equipment

Clean tools with water directly after use. Dried material can be removed with acetone.

Regular Cleaning

Vacuum floors, then clean with Bona Stone,Tile and Laminate Floor Cleaner Bona Microfiber Floor Mop. Alternatively, the Bona Stone, Tile and Laminate Floor Spray Mop can be used.

Maintenance

When the floor is starting to show signs of wear and needs freshening up, clean the floor as above and, once dry, apply a fresh layer of Bona Stone, Tile and Laminate Floor Polish. Use every 1-4 months to keep floors revitalised and looking their best. For removal of polish build-up, use Bona Remover.

This can be used on Herringbone tiles providing they are unglazed.

This is not designed to create a slippery finish.