Projects (A-Z)
Brands (A-Z)
Barrettine Wood Protective Treatment
£13.30 - £27.99
Quantity
|
|
FREE Delivery over £60.
Order by 5pm for next day option*
Order by 5pm for next day option*
A UV-resistant, deep penetrating, low odour protective treatment for all exterior wood that is harmless to beneficial insects and plants when dry.
Features
- A solvent-based protective top-coat for most exterior timbers
- Suitable for rough sawn or smooth timber
- Fade resistant colour pigments protect against sun damage
- Contains a film biocide to help prevent surface growth of mould and algae
- Safe for humans, plants and animals when dry
- Low odour formulation
- Very High VOC
| Brand | Barrettine |
|---|---|
| No. of coats | 2-3 |
| Coverage | Up to 6m² per litre |
| Drying time | 48 hrs |
| Size | 1L, 2.5L, 5L |
| MPN | Please Select Size/Option |
| GTIN | Please Select Size/Option |
Customers Also Bought
Overview
Barrettine Wood Protective Treatment is perfect for use on most exterior timber structures, including sheds, fences, trellises, pergolas and wooden gazebos. Absorbs into the wood with successive coats, building onto the surface, providing excellent water-repellency and beading. Solvent-based formulation for deeper penetration into the grain of the wood. Dries to between a Matt and a Satin finish, depending on the number of coats applied.
Please Note: The UV resistance only applies to the coloured variations, but not to the clear
Preparation
Ensure that surfaces to be treated are clean, dry and free from surface dirt, debris, mould, algae and other surface contaminates.
New or Bare Timber
- Remove traces of surface dirt, debris, mould and algae with a stiff brush, broom or scraper
- Areas that have been affected by mould, algae or fungi should be treated with Barrettine Mould and Mildew Cleaner prior to application
- For added protection against mould, algae and wood boring insects, pre-treat garden wood with Barrettine Universal Preservative or Barrettine Premier Wood Preserver for a similar colour range
Previously Coated Timber
- Any previous surface coatings such as paint, varnish or stain must be fully removed by sanding back to bare wood or using a paint stripper, unless it's a wood preservative treatment
Old Timber
- Wood that has become decayed should be removed and replaced
- Cut out and burn all decayed wood at least 45cm beyond the area of damage
- Brush down the wood with a stiff broom or brush to remove any ingrained surface dirt and biological growth
- Areas affected by mould, algae or fungi should be cleaned with a stiff brush or scraper then treated with Barrettine Mould and Mildew Cleaner
- Any existing instances of woodworm can be treated with Barrettine Premier Woodworm Killer
- Fill any gaps or splits in the wood with a suitable wood filler
Application
Always do a small test area before starting any project to assess compatibility and end result. Follow the manufacturer's instructions on the tin at all times.
Please Note: Wood should be dry for 24 hours before application and rain should not be forecast for at least 48 hours after application to achieve maximum benefit. Barrettine Wood Protective Treatment is best applied in temperatures between 5°C - 25°C. Do not apply below 5°C or in direct sunlight.
Shake or stir well prior to and during application to ensure a consistent colour.
- Apply Barrettine Wood Treatment evenly with a brush, in the direction of the wood grain
- Apply 2-3 coats for optimum protection
- Leave a minimum of 6 hours drying time between coats, longer with smoother wood or with less favourable drying conditions
Cleaning Equipment
After use, brushes can be cleaned with Barrettine Brush Cleaner or Barrettine Paint Brush Restorer.
Aftercare
Maintenance
Barrettine Wood Protective Treatment can be easily maintained as and when required by adding a fresh coat, following the Preparation and Application instructions above.
Reviews
Back