Projects (A-Z)
Brands (A-Z)
PeelAway 1 Neutraliser
£10.95
£10.95
Quantity
|
|
FREE Delivery over £60.
Order by 5pm for next day option*
Order by 5pm for next day option*
Spare 1L neutraliser for use with Peelaway 1 Removal System.
Features
- A concentrated liquid compound that will neutralise alkaline surface residues after using PeelAway1
- This additional spare neutraliser may be required depending on the porosity of the substrate
| Brand | Barrettine |
|---|---|
| Size | 1L |
| MPN | PEAN001 |
| GTIN | 5015861015013 |
Customers Also Bought
Previous
Next
Overview
PeelAway 1 Neutraliser is designed to neutralise more porous substrates after using PeelAway 1.
This is an important step in this process, as moisture containing PeelAway 1 residue may bleed out of the substrate and raise the pH of the surface. This will affect not only the adhesive properties of future coatings but their appearance too.
- Not sure which PeelAway system you require? Try our PeelAway 1 and 7 Sample Twin Pack
Preparation
Ensure surfaces to be neutralised are clean, completely dry and free from loose dirt and any other surface contaminants.
Application
Always do a small test area to confirm performance and compatibility before starting any project and follow the manufacturer's instructions on the container at all times.
- Mix 1 part Neutraliser with 1 part water
- Pour water into empty bucket then carefully add equal portion of PeelAway Neutraliser
- For plaster surfaces, dilute 4 parts water to 1 part PeelAway Neutraliser
- Pour diluted neutraliser into a garden type pressure sprayer or for smaller areas a hand-held trigger sprayer
- Start at the top and spray the entire surface until saturated
- Do not apply to surface in any way other than spraying as this may contaminate the Neutraliser
- Allow Neutraliser to remain on the surface until dry to the touch, but no less than 6 hours
- Neutralising effectiveness is maximised by scrubbing the surface once the Neutraliser has been sprayed on, but do not scrub plaster or gesso surfaces
- Rinse surface with a steady spray of clean water
- For external use apply sensible water pressure, enough to thoroughly rinse but not damage the surface
- Test pH level of the surface with pH paper
- Most accurate testing is accomplished when the surface has been allowed to air dry for a minimum of 24 hours after the neutralising process (Instructions for using the pH testing papers are attached to the handle of PeelAway 1 Neutraliser container)
- Moisten surface with water and apply a small strip of pH paper to the surface and note colour change and compare with pH charts on the inside of the covers of the pH papers
- Any surface with pH of more than 8 should be re-neutralised and left to dry thoroughly before re-testing
Reviews
Back