Here at Wood Finishes Direct we’re often asked, “ decking oil or stain, which is best?” This can sometimes be a tricky question to answer. Why? Because decking stains and oils can sometimes be the same thing and sometimes very different. Confused? Let’s explore this further.

What are these differences, we hear you ask…?
Although both decking stains and oils come in a wide range of natural wood tones and colours, only decking oils offer ‘clear’ or ‘natural’ versions. Clear decking oil products do however tend to enhance the natural colour and character of decking boards meaning that some colour change is still likely. If it’s a clear finish you’re looking for it’s decking oil all the way.
So what’s the confusion with decking stains?
A wood stain or decking stain can be defined as any product that uses a colour pigment to change the natural colour and appearance of the wood. As far as decking products go, this can mean a coloured decking oil or one of the alternative coating type products that leave a plastic or varnish like film over the surface of the wood. To better explain the differences between these products and to help you make an informed choice, read on to find out the pros and cons of each.
Decking Oil
Decking Oils are widely available in both clear (natural) and coloured formulations. Designed to penetrate in to the surface grain of the timber, decking oils protect wooden decking from within. The high concentrations of oil and wax make decking boards highly resistant to water and dirt ingress whilst providing a highly durable and easily maintained finish.

10 Benefits of Decking Oils
- Excellent coverage usually in the range of 8 to 12 square meters per Ltr. Some decking oils can cover up to 24 square meters per Ltr
- Rainproof and ready to use for light foot traffic in around 4 to 8 hours depending on the decking oil brand and product used
- Many contain UV filters to slow down the effects of UV damage to the timber. As a guide, darker coloured decking oils provide better UV protection than lighter coloured or clear decking oils
- They help to replenish the natural oils of the timber to keep the wood nourished and supple
- Oils work from within to help prevent cracking, splitting and warping of the decking boards
- Decking oils are easy to apply, clean and maintain. No need to strip back to bare wood before applying a replenishing or maintenance top coat
- It’s easy to carry out localised patch repairs to worn areas in high traffic environments
- Decking oils will not crack, peel, flake or blister from the surface of the wood
- They help to protect decked areas from mould and algae when well maintained
- Decking oils tend to be less slippery than stains as they don’t cover the wood with a plastic-like film, meaning that the naturally uneven texture of the timber provides better grip potential
Potential Decking Oil Issues
- Not all decking oils may be suitable for exotic hardwood decking such as Iroko, Balau, Massaranduba, Teak and Cumaru because of their oily character and dense grain. Highly refined or extra thin decking oils may be required
- Cannot be over-coated with a decking stain or decking paint unless the decking has been completely and thoroughly stripped or allowed to weather for several years
- The final colour of the oil can be influenced by the colour of the decking timber. This means that the final finish of the decking may not match the colour shown on the tin
It is worth mentioning that water-based decking oils and solvent-based decking oils are not compatible and cannot be used over each other. Always read the labelling on the tin before starting any project. Another way to check which is which is to read the brush cleaning instructions on the tin. If it says to use water to clean brushes, it’s water-based. If it says to use white spirit, it’s solvent-based.
Decking Stains
Decking stains tend to be varnish like products that coat the surface of the deck. Often available in a wide range of attractive wood shades, decking stains effectively seal the timber from the elements. It’s worth remembering that coloured decking oils are also often labelled as a ‘decking stain’.
For an in-depth guide on how to stain decking, check out our other article How To Stain Decking For A Flawless Finish.

7 Decking Stain Benefits
- Surface coating decking stains seal the deck with a plastic-like film or layer. This seals the surface with a highly durable layer that protects decking timbers from weathering and foot traffic
- The colour pigments in decking stains help to reduce the amount of UV exposure the wood receives, therefore helping to protect the timber from the greying effects of the suns UV rays
- Decking stains work well and looks great on decking accessories such as hand rails and spindles
- Stains provide good coverage and depth of colour
- Many decking stains are quick drying and are shower proof and ready to walk on in just a couple of hours
- Decking stains make it difficult for mould and algae to form on the surface of the deck
Potential Decking Stain Issues
- Can reduce the visibility of the wood grain due to the pigmented film between the timber and the surface
- Can potentially start to crack, peel and flake if the seal is compromised and moisture gets under the stain
- Must be fully removed if re-coating with a different stain or if the decking stain has started to break down and degrade
- Can be difficult to strip from grooved decking if applying a different decking treatment
- Cannot easily be applied to a decking that has been previously oiled. Any oil that remains in the decking may repel or prevent adhesion of the decking stain
- Can be problematic on new, naturally oily, dark exotic hardwood decking such as Iroko, Balau, Massaranduba, Teak and Cumaru. These timbers should be allowed to weather naturally for around 3 to 6 months to allow the surface grain to open and for some of the natural oils to dissipate
Please Note: Not all decking stains are compatible with each other. Always check with the manufacturer before applying any decking treatment over another.
Recommended Decking Oil and Stain Products
Unsure of which decking oil or decking stain to use? Here are some of our top recommendations. All of these products deliver great results and will ensure that decked areas will stay protected and looking great for longer.
3 of the Best Selling Decking Oils
Manns Premier UV Decking Oil: A multi-purpose exterior oil treatment. Excellent water-beading properties and weather protection. Reduces the risk of timber cracking, splitting and warping. Suitable for both softwood and hardwood decking, sheds, fences & pergolas. Unique UV formula keeps wood looking good for longer and resists the greying effects of the sun. Can be used on all pre-treated, pressure treated and preservative impregnated timber.
Sadolin Decking Oil: Is a high quality, solvent-based, clear decking oil for all softwood and hardwood decking. It Nourishes and enhances the natural beauty of decking boards and protects from UV damage with UV filters. It is resistant to mould and algal growth and offers excellent weather protection and water resistance.
Osmo Decking Oil: Osmo Decking Oil protects, maintains and beautifies the wood surface, producing a smooth satin finish which is extremely resistant to water and dirt. The microporous finishes are based on natural vegetable oils and allow the wood to breathe and helps regulate the moisture content, reducing swelling and shrinkage. The finish will not crack, flake, peel or blister. This product offers excellent coverage and is especially suitable for dense, exotic hardwood decking.
2 of the Best Selling Decking Stains
Ronseal Ultimate Protection Decking Stain: Uses advanced technology to penetrate deeper into the wood for increased adhesion and hardness, to provide up to double the foot traffic protection and weather resistance versus the standard Ronseal Decking Stain formulation (based on Ronseal’s weathering data).
Ronseal Decking Stain: A pigmented / coloured deck stain. Suitable for a wide range of soft and hardwood decking. Hard-wearing and weather resistant. Available in a range of attractive natural colours. Quick and easy to apply. Suitable for high foot traffic areas. Dries to a semi-translucent, matt finish. Contains UV filters to reduce greying.
Top Tips for applying decking oils and stains
- Always, stir the contents of the tin thoroughly, at least for a couple of minutes before applying. This ensures that colour pigments and other important ingredients of the product are well distributed and not concentrated at the bottom of the tin.
- Always do a test patch and allow the decking oil or stain to fully dry before starting any project. This provides an opportunity for you to see how the product will look when dry. Does it meet your expectations?
- Only apply in double figure temperatures and when the weather is set to be dry for at least the minimum drying time displayed on the tin. Single figure temperatures, damp or wet conditions could adversely affect the application and final finish of the product
- Look out for special and end of season offers. Decking oils and decking stains can be had at a discount towards the end of the summer season, meaning that you can stock up for the next year and make a saving in the process
Need help with your decking finish?
Unsure about which decking product to use on your garden decking?
For more information about decking oils and decking stains, contact our team of resident experts who are always on hand to help with project advice and product recommendations.
We love to see before, during and after photos of any wood finishing project. If you would like to share your decking project pictures with us, you can either send us some photos or share on our Facebook, Twitter, Pinterest or Instagram pages.
Other great decking related blog posts
Here are some of our other top ‘decking’ related blog posts that cover all aspects of cleaning, maintenance and some of the more common issues with decking finishes.
82 comments
I have decking in my new house, it has been treated previously but I have no idea if it was with stain or oil, is there a way to tell?
Am I right in saying either would have to be removed before applying more stain or oil? And if so how is that done?
Thanks
Reply to Mike:
Good Afternoon Mike,
I am sorry for the delay in response, it is a super busy time here at Wood Finishes Direct. A stain or paint is a surface sealer and is likely to, over time, peel and flake, if the treatment appears to be lifting it is likely that this is the finish you have and this can be removed with a pressure washer or stripper product such as the Paint Panther Paint and Varnish Remover (https://www.wood-finishes-direct.com/products/barrettine-paint-panther-paint-varnish-remover)
If the finish is an oil it should have soaked into the surface of the wood and will naturally wear away over time, it will not peel and flake unless it has been over applied.Oils can not be removed with a stripper, some lift will come from using a pressure washer, but take care not to hold the nozzle too close to the woods surface as this will damage and splinter the wood.
My best advice for a fresh treatment will be to get the wood back to bare and use a Decking oil such as Manns UV Decking Oil (https://www.wood-finishes-direct.com/products/manns-premier-uv-decking-oil) its easy to apply, clean and maintain over time, will not peel and flake and can slow down the silvering effect of UV damage.
I hope that helps and of course if you have any questions feel free to get in touch via our contact us (https://www.wood-finishes-direct.com/pages/contact) page.
Many Thanks Samantha.
Hi there,
I just recently installed wooden deck in my garden, I was wondering what would be the best option to prevent weathering from occurring or just any damage occurring from rain , something which allows protection but also the natural colour of the wooden deck is maintained.
Thank you very much
Reply to Shear:
Good Afternoon Shear,
A really good choice for decking is Barrettine Decking Oil (https://www.wood-finishes-direct.com/products/barrettine-decking-oil) this is an easy to apply protective treatment that soaks into the surface of the wood. It helps to make the wood moisture repellent and will give UV protection to slow down the silvering effect. There is a clear in this range that will enhance the natural colours of the wood, or if you would like to add colour this will increase the UV protection to the wood.
If you take a look at this product and feel free to get back to me if you have any further questions.
Kind Regards Samantha.
Hi Maureen,
What is the most penetrating decking oil available? I have a cumaru hardwood deck which has been a real pain to keep looking good since I put it down 6 years ago. I’ve tried several products including the ludicrously expensive Owlatrol D1, and even that didn’t last 6 months before it began failing. I’ve just sanded the deck yet again and this time treated it with Barrantine Premier wood preserver (because its very thin) and it looks superb. However there is no water beading when it rains, and I suspect it won’t look good for long. I need an oil that will get into the wood like the preserver, but everything I’ve tried just forms a film on the top, which fails in patches. Any suggestions would very welcome.
Thanks Guy
Reply to Guy Hubbard:
Good Afternoon Guy,
The Barrettine Premier Wood Preservative (https://www.wood-finishes-direct.com/products/barrettine-premier-wood-preservative) is a great starting point and one that we often recommend to be applied first. It will help to prevent mould, mildew and rot and has some wax for moisture repellency. To follow that I would always recommend a Decking Oil and as you have a Hard wood decking the best option will be the Osmo Decking Oil (https://www.wood-finishes-direct.com/products/osmo-decking-oil) this will give the moisture protection that you need and it is a slightly thinner oil more suited to hardwoods. It requires just two very thin coats for application.
It does not contain UV filters however and will allow the wood to silver naturally, to have the UV filters will thicken the oil and make it less suitable for Hardwoods. Generally a Decking is likely to need maintenance annually, it is the most exposed area of wood in the garden and will be subject to wear and tear. The benefit of an oil is that it is super easy to top up by simply ensuring the surface is clean and dry and then apply a fresh coat, no need for any stripping back to bare wood.
I hope that helps and of course if you have any questions please do not hesitate to get back to me.
All the Best Samantha.
I have just treated my decking with Ronseal decking rescue paint (charcoal).
Would I be able to apply Ronseal ultimate decking stain of the same colour over this?
Reply to Paul:
Good Afternoon Paul,
The Rescue Paint is an quite a thick, opaque finish, where as the stain is a more translucent finish that needs to penetrate the surface of the wood, the Rescue paint will prevent this from happening and so I would not expect them to be compatible.
If you have any questions or if there is anything further that they can help with please do let me know.
Kind Regards Samantha.
I have a trough that has been made from decking. It is new and not been outside yet. Do I oil it straight away or leave it for a few months to let whatever the wood has been treated with wear away?
Reply to Maureen:
Hello Maureen,
Thank you for getting in touch with your enquiry. It depends what was previously on the wood and how long ago it was treated. You can do an oil test, leaving a small drop of oil on the surface of the wood for around an hour and see how it reacts. If it moves or soaks in then you are likely to be able to apply an oil if it remains unmoved then the is something on the wood that is preventing penetration.
When the wood is ready to take an oil then you are able to use a Decking Oil such as Barrettine Decking Oil (https://www.wood-finishes-direct.com/products/barrettine-decking-oil) it will help to keep the wood protected from UV damage and repel moisture. It is available in a clear or coloured finish. Always try a test area first.
And if there is anything further that I can help with please do let me know.
Kind Regards Samantha.