Projects (A-Z)
Brands (A-Z)
Morrells 250 Medium Solids Basecoat
£41.28
Quantity
|
|
FREE Delivery over £60.
Order by 5pm for next day option*
Order by 5pm for next day option*
Versatile basecoat to prepare bare wood before use of pre-cat lacquer.
Features
- A 25% solids, industry leading primer, providing a smooth prepared surface
- Touch dry within 15 minutes, re-coatable within 30 mins
- Contains filling agents to assist with sanding
- Can be spray applied, rollered or brushed
- Seals fine scratches and blemishes
- High VOC
| Brand | Morrells |
|---|---|
| No. of coats | 1-2 |
| Coverage | Up to 8m² per litre |
| Drying time | 15 mins |
| Size | 5L |
| MPN | 9004/250B |
| GTIN | 5060403897695 |
Customers Also Bought
Previous
Next
Overview
Morrells 250 Medium Solids Basecoat is ideal as a basecoat for Morrells 250 Pre-cat Lacquer. With increased penetration, this basecoat sinks further into the surface grain which helps with adhesion for better a finish with a topcoat.
- Need a basecoat with a high solids content? Try Morrells 280 High Solids Basecoat
Preparation
Ensure that all wooden surfaces to be treated are clean, dry and free from surface dirt, debris, waxes and oils.
- Fill any gaps or splits with Morrells Wax Filler Sticks or Morrells Two-Part Coloured Wood Fillers
- Surfaces can be degreased with White Spirit before coating
Application
Always do a test area before starting any project to test product performance and results. Follow the manufacturers instructions on the tin at all times. Optimum application is achieved between 18°C and 22°C with good air movement and ventilation.
- Apply the basecoat with a spray applicator
- Leave adequate drying time between coats
- Denib between coats to aid with adhesion
- Do not apply more than 3 coats in one day, as excessive coating weights can lead to cracking or lifting
Typical Finish: 1-3 coats at 75g/m² per coat (Dry Film Thickness ~ 23µ per coat) coat on coat or over Morrells recommended basecoat/sealers.
Cleaning Equipment
Spray applicators can be cleaned after use with Morrells Equipment Cleaner.
Some Points of Note
- Do not overcoat with 1K or 2K Polyurethane (PU) products
- This range is not suitable for "pulling over"
- Use 2007/200 Anti-Chill Thinners when applying in conditions of high atmospheric humidity, using a maximum of 5% by volume
- Use 2007/201 Retarder Thinners to slow down the drying in warm conditions, using a maximum of 5% by volume
- Product should be stored above 5°C and protected from frost
- Finished products should not be subjected to environments with temperatures of < 2°C
Using these products in systems outside these guidelines can lead to immediate and latent problems with the integrity of the finish.
Finishing
Once fully dry, Morrells 250 Medium Solids Basecoat can be over-coated with Morrells 250 Pre-cat Lacquer.
Reviews
Back