Barrettine WSP Universal Wood Preserver 5L

 
COVERAGE CALCULATOR
 x 
You'll need enter area above for 1 coat (Standard Protection)
You'll need enter area above for 2 coats (Ultimate Protection)

Wood type and application can vary coverage

 
  • A quick drying universal wood preserver for interior and exterior use
  • Treats dry rot, wet rot and wood boring insects
  • Solvent-free
  • Low V.O.C
Brand Barrettine
No. of coats 1
Coverage Up to 4 per litre
Drying time hrs
Size 5L
MPN WSPUN05
GTIN 5015861860507

Barrettine WSP Universal Wood Preserver is a very low odour preservative that is suitable for both internal and external use prior to coating with a wood paint, varnish or sealer.

For a spirit based wood preserver, see Barrettine Premier Wood Preservative. For a wax-free, solvent-based alternative, see Barrettine Premier Universal Preservative.

Ensure that wooden surfaces to be treated are clean, dry and free from surface dirt, debris and other surface contaminates.

New Bare Wood

  • If required, new bare timber can be cleaned and degreased with White Spirit prior to application

Previously Treated Wood

  • Any surface coatings such as paints, varnishes and stains must be fully removed back to clean, bare wood by sanding or with a suitable stripper / remover

Old Untreated Wood

  • Wood that has become decayed should be removed and replaced
  • Cut out and burn all decayed wood at least 45cm beyond the area of damage
  • Brush down the wood with a stiff broom or brush to remove any ingrained surface dirt and debris
  • Traces of mould, algae or fungi must be removed with a stiff brush or scraper
  • Areas that have been affected by mould, algae or fungi should be treated with fungicidal wash or mould and mildew cleaner prior to application

Always do a small test area before starting any project and follow the manufacturer's instructions on the container at all times.

  1. Shake thoroughly and decant into an appropriate container
  2. Apply Barrettine Universal Wood Preserver with a synthetic brush, roller or shed and fence spray system
  3. Where possible, end grain should be dipped or given extra coats for additional protection
  4. Apply a second coat if required, allowing 4 hours drying time between coats

Once dry, wood treated with Barrettine WSP Universal Wood Preserver can be overcoated with a suitable wood oil, paint, stain or varnish.

Ask a question Live Chat