HOME > wood finishes > wood stains & dyes

Wood Stains & Dyes

Wood stains from light pine to dark oak

With a wide variety of water, wax & solvent-based wood stains and dyes we're confident that we'll have a product for every task.

Our interior and exterior finishes, wood stains and wood dyes come in a wide range of colours & shades. Made from only the finest ingredients, our wood stains & dyes are effective and easy to use.

6 WOOD STAINS & DYES available below
Solvent based wood stain from £6.95 for 500ml

Solvent based wood stain
  • Fast drying
  • Does not raise the wood grain
  • Complements clear top coats
Wood Stain from £4.95 for 500ml

Wood Stain
  • Virtually no odour
  • Very easy to use
  • Enhances the natural grain
Wax Stain from £9.20 for 1 Litre

Wax Stain
  • Easy to use
  • Gives added shine
  • Superior ageing effect
Wood Dye (Water Based) from £5.95 for 250ml

Wood Dye (Water Based)
  • Quick & easy to use
  • Mix & match colours
  • Use with water & acrylic products
Wood Dye (solvent based) from £6.95 for 250ml

Wood Dye (solvent based)
  • Quick drying
  • Mix & match colours
  • Use with solvent based products
Vandyke Crystals from £2.95 for 100g

Vandyke Crystals
  • A natural, traditional use wood dye made from walnut husks

3 RELATED PRODUCTS
Floor Stain Floor Stain - from £6.75

A water-based wooden floor stain that can be quickly and easily applied with a roller, sponge or paint brush. Suitable for all interior wooden...
Shed & Fence Stain Shed & Fence Stain - only £8.95

Protect the look and prolong the life of Sheds, fences & other exterior wood work with Barrettines shed & fence treatment. With...
Wood Preservative Wood Preservative - only £16.84

An all in one solution for the treatment and prevention of damage from wood rot, fungi and woodboring insects on any timber. Wood...

Water Staining Hint: When brushing a water based top coat, such as water lacquer, over a water based stain, take care to use the minimum of brush strokes to avoid lifting the colour out of the stain. This is normally only applicable when a brush is used. Spraying will not cause this problem. This problem will not occur when using a solvent base top coat over a water based stain or vice versa. Once the initial top coat has been carefully applied, further coats can be applied in the normal way.